.svg)
.svg)
The ZK-U485 is a compact module that converts serial data from USB (Type-A) to a 2-wire half-duplex RS485 (terminal block) interface. It is often used for: Connecting PLCs to a computer. Communicating with motor drives (VFDs). Data acquisition from sensors (Modbus RTU). Building automation systems.
Installing the is a straightforward process, usually involving the CH340 driver package. By ensuring the proper driver is installed and confirming its presence in the Device Manager, you can establish stable, reliable RS485 communication for industrial and hobbyist projects. zk-u485 driver
Extract the .zip file and run CP210xVCPInstaller_x64.exe (for 64-bit systems). 3. Physical Wiring Guide Once the driver is installed, wire your RS485 network: Driver Installation for USB-TO-RS485 Converter - All Motion The ZK-U485 is a compact module that converts
Configure the serial port with the correct settings for your connected RS485 device (baud rate, data bits, parity, stop bits). The TX and RX LEDs on the ZK-U485 itself will flash when data is being sent or received, providing a valuable visual confirmation. Data acquisition from sensors (Modbus RTU)
Automatic data flow hardware control (no RTS/DTR handshaking required) Step-by-Step Driver Installation Guide
On Linux, the device file name may change if multiple USB-to-serial adapters are connected. Check with ls /dev/ttyUSB* to find the correct one.
