Before you change anything, write down the current VLAN ID (e.g., 10 , 20 , 100 ) and the connection protocol (often PPPoE or IPoE ). You will need this to set up your external router later.
To log back in later, manually assign a static IP address to your computer's Ethernet adapter (e.g., IP: 192.168.1.50 , Subnet Mask: 255.255.255.0 ). You can then type 192.168.1.1 into your browser to reach the gateway. Zte F689 Bridge Mode
Click on the existing Internet connection profile, locate the delete button, and clear it. This removes the ISP's routing commands safely. Before you change anything, write down the current
Bridge mode disables the local IP management on the LAN port unless you set a static management IP. Solution: You cannot access 192.168.1.1 via your router (because your router is now on a different network). To get back into the ZTE: You can then type 192
Save the configuration file to your computer. If anything goes wrong, you can upload this file to restore your internet. Step 3: Change the WAN Connection to Bridge Mode Navigate to the tab in the top or side menu. Click on WAN and select WAN Connection .
The difficulty of setting up bridge mode varies significantly by provider: