Dp Dual Trac 20 Assembly Instructions Full |work| <Exclusive>

Insert the weight selector pin into a light weight setting (e.g., 20–30 lbs). Slowly pull the lat bar and extension arm to verify that the pulleys turn freely and the cables do not rub against the steel frame.

If you are missing a cable guide or sleeve, note that the DP Trac 20 uses specific part numbers— #04023600 for the Large Sleeve and #04023400 for the Small Sleeve . These are discontinued but may be found on vintage parts forums. dp dual trac 20 assembly instructions full

: Ensure a flat, clear area. Once the weight stack is installed, the machine is extremely heavy and difficult to move. : You will typically need a 9/16" wrench or socket rubber mallet for end caps, and potentially an Allen wrench Insert the weight selector pin into a light

Due to the weight and size of the main frame components, this assembly is a two-person job. Clear Workspace: Ensure you have at least a space for assembly. These are discontinued but may be found on

Note: The resistance adjustment knob should be accessible at the top of the cylinder. Step 5: Attaching the Handlebar

Connect the left and right base tubes to the stabilizer bracket.