Otis Gen2 | Scratch Verified

when I receive [Start Travel v] repeat until <(car_y_position) = (target_floor_y)> if <(car_y_position) < (target_floor_y)> then set [direction v] to [up] change [current_velocity v] by (0.2) // Smooth acceleration else set [direction v] to [down] change [current_velocity v] by (-0.2) end if <(distance_to_target) < (30)> then set [current_velocity v] to ((current_velocity) * (0.8)) // Dampened braking curve end change [car_y_position v] by (current_velocity) end set [current_velocity v] to [0] broadcast [Arrived at Floor v] Use code with caution. Designing Genuine Otis Visual Layouts

: Official technical details for the Otis Gen2 are typically proprietary. Professionals can access them through Otis customer support or authorized dealer portals. Maintenance Documentation : Publicly available Operation & Maintenance Manuals otis gen2 scratch

The elevator car and counterweight travel up and down along vertical steel T-rails, guided by roller guides or sliding guides. "Scratches" here manifest as linear scoring or gouges running vertically along the rail surface. when I receive [Start Travel v] repeat until

If the inner cords are compromised, the system will automatically log a fault and, depending on the severity, safely park the elevator at the nearest landing and remove it from service until a technician replaces the belt. Inspection and Diagnostic Procedures it can cause vibrations

Severe scratches that cut deep into the polyurethane layer. If the groove is deep enough to alter how the belt sits in the sheave, it can cause vibrations, ride discomfort, or noise.

: