Siruba+l818fm1+error+list+2021 |work| -

Check the encoder (encoder cable) for damage or loose connection. [E007] Thread Trimmer Error:

: Ensure the synchronizer unit attached to the handwheel hasn't slipped out of position. siruba+l818fm1+error+list+2021

| Code | Description (Original Text) | Recommended Action (Paraphrased) | | :--- | :--- | :--- | | 100 | "GREASEUP"通知出现后，若不添加润滑脂 | Add grease and then execute the clearing operation. | | 111 | 停车位置不正确 | Turn off power, check for abnormalities in the thread trimming device or the sewing machine motor. | | 121 | 剪线无法完成 | Turn off power, check the blades of the fixed and movable knives for scratches or damage. | | 130 | 主马达故障 | The spindle motor or its controller is faulty. | | 131 | 同步显示器接触不良 | Turn off power, check the condition of the P11 plug on the motor main board. | | 132 | 发现缝纫机主马达非正常旋转 | Turn off power and check the motor's P11 plug. | | 133 | 缝纫主马达停止位置不良 | Turn off power and check the motor's P11 plug. | | 150 | 缝纫机主马达非正常升温或者温度传感器运转不良 | Check the motor condition. (Can occur with very short stitch cycles). | Check the encoder (encoder cable) for damage or

: Inspect the motor wiring for damage and ensure the sewing machine head moves freely without being "locked" by a thread jam. E2: High Voltage or Inertia | | 111 | 停车位置不正确 | Turn off