Cem Dual Mig 120 Manual -

IP21S, indicating it is protected against solid objects and vertical water drops but should not be used in heavy rain. clarkeservice.co.uk 2. Setup and Installation

Feeding new wire through a captive torch system requires patience to avoid bird-nesting (tangled wire inside the feed mechanism).

| Material | Thickness | Voltage | Wire Speed | Gas (L/min) | |----------|-----------|---------|------------|--------------| | 1 mm auto body | 20ga (0.8 mm) | 3 of 6 | 4 | 10 | | 2 mm mild steel | 14ga (1.9 mm) | 5 of 6 | 7 | 12 | | Flux-core, no gas | 2 mm | 4 of 6 | 6 | N/A | cem dual mig 120 manual

Here are some common issues and owner-tested solutions.

Connect the MIG torch to the Negative (-) terminal and the ground clamp to the Positive (+) terminal (DCEN - Direct Current Electrode Negative). 2. Loading the Wire Spool Open the side compartment door. Unscrew the plastic retaining nut from the spool spindle. IP21S, indicating it is protected against solid objects

Lack of shielding gas coverage; wind blowing gas away; incorrect polarity.

Always weld in a well-ventilated area to avoid breathing hazardous fumes, especially when utilizing flux-cored wire. | Material | Thickness | Voltage | Wire

Use a welding helmet with a minimum Auto-Darkening Filter (ADF) shade of 10 to 11.